Inconel 625 Nickel Alloy
Certification: ISO9001:2015
Alloy category: Corrosion-resistant alloy
Alloy series: Nickel-chromium-iron alloy
Kao vodeći dobavljač i proizvođač u Kini, GNEE Steel nudi isplative-proizvode od legura na bazi nikla-.
- Pošalji e-poštu:ss@gneesteel.com
- Tel:+8615824687445
Inconel Alloy 625 is a high-strength, corrosion-resistant nickel-chromium-molybdenum-niobium alloy with excellent corrosion and oxidation resistance.
Alloy 625 has a density of about 8.44 g/cm³, a melting point between 1290 degree and 1350 degree , relatively low thermal conductivity, and low electrical conductivity. The operating temperature range is from cryogenic to 1800 degree F (982 degree ).
Inconel Alloy 625 is available in the form of tubes, pipes, plates, strips, plates, round bars, flat bars, forgings, hexagonal bars, and wires. These products are available in a variety of sizes.
Nickel Alloy 625 UNS N06625 Applications
1. Aerospace Industry: Aircraft duct systems, engine exhaust systems, thrust reversal systems, and rocket engine parts.
2. Chemical Industry: Equipment for handling and processing corrosive chemicals, such as chemical plant reactors, vessels, and piping systems.
3. Marine Engineering: Propeller blades, shafts, and other components in seawater applications.
Inconel® 625 Specifications
| C | – | 0.10 |
| – | 0.50 | |
| – | 0.50 | |
| P | – | 0.015 |
| S | – | 0.015 |
| 20.00 | 23.00 | |
| – | 1.00 | |
| 8.00 | 10.00 | |
| – | 5.00 | |
| – | 0.40 | |
| – | 0.40 | |
| 58.00 | – | |
| 3.15 | 4.15 | |
| – | 0.05 | |
| – | 0.5 |
The typical mechanical properties of Inconel® 625:
|
0.305 |
||
| g/cm3 |
8.44 |
|
|
2350-2460 |
||
|
1290-1350 |
||
|
|
||
|
0 degree F (-18 degree ) |
0.096 (402) |
|
|
70 degree F (21 degree ) |
0.098 (410) |
|
|
200 degree F (93 degree ) |
0.102 (427) |
|
|
400 degree F (204 degree ) |
0.109 (456) |
|
|
600 degree F (316 degree ) |
0.115 (481) |
|
|
800 degree F (427 degree ) |
0.122 (511) |
|
|
1000 degree F (538 degree ) |
0.128 (536) |
|
|
1200 degree F (649 degree ) |
0.135 (565) |
|
|
1400 degree F (760 degree ) |
0.141 (590) |
|
|
1600 degree F (871 degree ) |
0.148 (620) |
|
|
1800 degree F (982 degree ) |
0.154 (645) |
|
|
2000 degree F (1093 degree ) |
0.160 (670) |
|
| 200 Oerstedt permeability (15.9 kA/m) |
1.0006 |
|
|
<-320 |
||
|
<-320 |
-196 |
The specifications of Inconel 625 include the following:
|
ASTM B 446/ASME SB 446 |
ASTM B 564/ASME SB 564 |
ASTM B 443/ASTM SB 443 |
ASTM B 444/ASME SB 444 |
ASTM B 704/ASME SB 704, ASTM B 705/ASME SB 705 |
ASTM B 366/ASME SB 366 |
Inconel 625 Nickel Alloy - AMS 5666
Professional nickel-based alloy steel pipe supplier-GNEE
Q.What is the difference between Inconel 625 and 718?
A:Alloy 625 is primarily nickel-based, while alloy 718 is nickel + cobalt (Ni+Co)-based. Alloy 625 has higher levels of chromium and molybdenum, making it more corrosion resistant.
Popularni tagovi: inconel 625 nickel alloy, China inconel 625 nickel alloy suppliers, Metoda proizvodnje legura Inconel, postupak žigona, Dijelovi detektora legure angel, Dijelovi radarskog sustava UNELL ALLOY, legura za spajanje dijelova šipke, Instrumentacijski dijelovi s legurom
Sljedeći
Legura angel 718Mogli biste i voljeti
Pošaljite upit